V-Groove Yoke Rollers
Plain rollers allow loads to ride against the outer diameter or bearing face. Flanged rollers are designed for side guiding, where the intended load can ride up against the flange. V-Groove rollers can be used on v-shaped tracks, where contaminants don't build up as easily as they do on flat, level tracks.
V-Groove Yoke Type MVYR Series bearings are designed to handle both axial and radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should be used when standard needle roller bearings are not sufficient to handle the thrust load found in certain applications.
- lubrication hole location: PCI Procal Inc. VTRY-4.50 V-Groove Yoke Rollers
- PCI Procal Inc.
- VTRY-4.50
- series: McGill VCYR 5 1/2 V-Groove Yoke Rollers
- McGill
- VCYR 5 1/2
- technical specifications: PCI Procal Inc. VTRY-8.50 V-Groove Yoke Rollers
- PCI Procal Inc.
- VTRY-8.50
- lubrication hole location: PCI Procal Inc. VTRY-5.00 V-Groove Yoke Rollers
- PCI Procal Inc.
- VTRY-5.00
- point diameter: Smith Bearing Company MVYR-200 V-Groove Yoke Rollers
- Smith Bearing Company
- MVYR-200
- radial static load capacity: PCI Procal Inc. VTRY-9.50 V-Groove Yoke Rollers
- PCI Procal Inc.
- VTRY-9.50
- lubrication hole location: PCI Procal Inc. VTRY-11.50 V-Groove Yoke Rollers
- PCI Procal Inc.
- VTRY-11.50
- roller diameter: INA (Schaeffler) LFR5201-10-2Z V-Groove Yoke Rollers
- INA (Schaeffler)
- LFR5201-10-2Z
- bore diameter: Smith Bearing Company VYR-5-1/2 V-Groove Yoke Rollers
- Smith Bearing Company
- VYR-5-1/2
- bore diameter: Smith Bearing Company MVYR-250 V-Groove Yoke Rollers
- Smith Bearing Company
- MVYR-250
- radial static load capacity: Osborn Load Runners VLRY-7-1/2 V-Groove Yoke Rollers
- Osborn Load Runners
- VLRY-7-1/2
- roller width: INA (Schaeffler) LFR5201-NPP V-Groove Yoke Rollers
- INA (Schaeffler)
- LFR5201-NPP